Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 277
Holiday Group Mask
There are eight holiday groups that can be assigned to a holiday. These form a mask used by the schedules. If a
holiday is valid and a schedule has the same group set for the holiday group option then the schedule will
function normally on that day.
HL001 Hol Mask
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 336).
Option 1 - Holiday Group One
y Enabled the holiday will belong to group 1.
y Disabled the holiday will not belong to group 1.
Option 2 - Holiday Group Two
y Enabled the holiday will belong to group 2.
y Disabled the holiday will not belong to group 2.
Option 3 - Holiday Group Three
y Enabled the holiday will belong to group 3.
y Disabled the holiday will not belong to group 3.
Option 4 - Holiday Group Four
y Enabled the holiday will belong to group 4.
y Disabled the holiday will not belong to group 4.
Option 5 - Holiday Group Five
y Enabled the holiday will belong to group 5.
y Disabled the holiday will not belong to group 5.
Option 6 - Holiday Group Six
y Enabled the holiday will belong to group 6.
y Disabled the holiday will not belong to group 6.
Option 7 - Holiday Group Seven
y Enabled the holiday will belong to group 7.
y Disabled the holiday will not belong to group 7.
Option 8 - Holiday Group Eight
y Enabled the holiday will belong to group 8.
y Disabled the holiday will not belong to group 8.
Daylight Saving Adjustment
To access daylight saving programming, login using a valid code that has access to the daylight saving
programming menu and then select [MENU, 6, 4]. The screen will then immediately display the daylight savings
start configuration screen.
D/S Starts on
None
Every time you press the Enter key, the next screen appears. The different screens are described in the
following sub-sections. Programming the daylight saving settings in the Protege System allows the system to
accurately compensate for daylight savings adjustments for the time zone the system controller is located in.