Specifications

276 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Holidays
To access holiday programming, login using a valid code that has access to the holiday programming menu and
then select [MENU, 6, 3]. The screen will then prompt you to "Select a holiday to modify" requesting that you
enter a holiday number. Type the appropriate 3-digit holiday number or use the [Ð] and [Ï] keys to scroll the
available holidays. When the desired holiday number appears on the screen, press [ENTER] to program the
selected holiday. The maximum number of holidays that can be programmed is limited by your system's
memory and configured profile.
To browse the holidays by name press [ENTER] when prompted for a holiday number to modify and then use
the [Ð] and [Ï] keys to scroll the available holidays by their name.
Holiday to
modify: HL001
Every time you press the Enter key, the next screen appears. The different screens are described in the
following sub-sections. Programming the holiday settings in the Protege System allow you to prevent schedules
from operating on a public holiday or pre-defined holidays.
Selecting Holiday to Modify
Each holiday entry is assigned a unique holiday number from 001 to 250.
Holiday to
modify: HL001
Type the appropriate 3-digit holiday number or use the [Ð] and [Ï] keys to scroll the available holiday entries.
When the desired holiday number appears on the screen, press [ENTER] to program the selected holiday entry.
The maximum number of holidays that can be programmed is limited by your system's memory and configured
profile.
Holiday Name
If the selected holiday entry has a name associated (some holiday entries may not have a name associated with
them) the name programming screen will be shown.
HL001 Name
*Holiday 001
To scroll holiday entries by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected
holiday item use the keypad as explained in section Entering Text and Names (see page 333) and press
[ENTER].
By default the holiday name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
Holiday Start Date
Program a starting date for the holiday. To make the starting date occur annually leave the year blank (----).
HL001 Start
Date: --/--/----
To modify the holiday starting date use the keypad as explained in the section Entering Time and Date Values
(see page 334) and press [ENTER].
Holiday End Date
Program an ending date for the holiday. To make the ending date occur annually leave the year blank (----).
HL001 End
Date: --/--/----
To modify the holiday ending date use the keypad as explained in the section Entering Time and Date Values
(see page 334) and press [ENTER].