Specifications

270 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Viewing Automation Status
Viewing the automation status is identical to viewing the automation status in the offline menu when the keypad
has offline automation status enabled. Login using a valid code and then select [MENU, 5, 6]. The screen
displays "Automation to view" as shown in the following example.
Automation to
view: AT001
Type the appropriate automation number or use the [Ð] and [Ï] keys to scroll the available automation points
that are available. When the desired automation number appears on the screen, press [ENTER] to view and
control the selected automation number.
Automation Control and Status Display
Each door will display the status of the automation point.
*Automation 001
is OFF
Use the [Ð] and [Ï] keys to scroll the available automation points while in the view screen, press the [1] key to
turn on the automation point for the programmed control time, press the [2] key to turn of the automation point
and press the [3] key to activate the automation point latched. Press the [Í] to return to the Automation
selection display.
The display will show the automation states listed below.
OFF Automation Point is deactivated
ON Automation Point is activated by a user entry
TIMED Automation Point is activated for time period by manual control
LATCH Automation Point is activated latched by manual control