Specifications
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 27
User Card Number
When user requires control of card reader and access functions in the Protege System they must be
programmed with a card number. Type the family or facility code in the previous entry and the card number of
the access control card that will be given to the user in the card number entry below then press [ENTER].
UN00001 Card
no: 4294967295
The card number when blank or deleted is shown as the maximum card number of 4294967295 and to default
or clear the card number press the [DISARM] key.
If you are not aware of the card number you can present the card to any reader that is programmed in the
system. The card number that is read will be displayed in the location only if it is not already programmed or
allocated to a user.
The Protege System also supports the loading of cards automatically. This will increment the user number and
wait for the next valid presentation of a card that is not currently in the database and storing the details for that
user in the current record.
y To enable automatic loading of the card information press the [ARM] key and a brief message will be shown
with the current automatic card loading status.
Autoload mode
enabled.
y Once the screen returns to the facility id entry screen as shown below presenting a card to a reader will
program the card in to the system and automatically increment the user number. The facility and the card
number will be programmed when the auto loading is enabled.
UN00001 Facility
id: 4294967295
y To disable the automatic card loading mode press the [ARM] key which will toggle the automatic card
loading mode back to disabled.
Autoload mode
disabled.
User Secondary Family / Facility Number
Each user can be assigned two separate cards. To program a second card enter the family number of the
card and then press [ENTER].
UN00001 2nd Fac
id: 4294967295
i
The number 4294967295 is the maximum facility code and is a reserved number, setting this number
will disable the card for this user.
User Secondary Card Number
Each user can be assigned two separate cards. To program a second card enter the family number of the
card and then press [ENTER].
UN00001 2nd Card
no: 4294967295
The card number when blank or deleted is shown as the maximum card number of 4294967295 and to default
or clear the card number press the [DISARM] key.