Specifications

268 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Bypassed Zone(s) View
To view all bypassed zones in the system select [MENU, 5, 3], the system will run a check and verify each zone
in the system. The display will show the first zone that is bypassed and the user can then press the DOWN key
to continue searching.
y Select the bypass zone view menu [MENU, 5, 3]. The display will show the checking zone(s) for bypass
message while it is scanning all zones in the system for a bypass condition.
Checking zone(s)
for bypass...
y If a zone is bypassed the zone will be displayed on the screen and the prompt will ask if you wish to
continue searching.
Warehouse PIR
Find next zone?
y Pressing the [Ð] key will display the next zone that is bypassed. Pressing the [Ï] key will begin searching
from the start. If the bypass for this zone needs to be removed you can do this by selecting [MENU, 7, 1],
use the search feature in the zone bypass to find the zone using the text name.
Bypass list
completed.
If all zones have been searched the display will show the bypass list completed message above. Pressing the
[Ï] key will begin searching from the start.
Viewing Door Status
Viewing the door status is identical to viewing the door status under the control menu in the advanced section.
Login using a valid code and then select [MENU, 5, 4]. The screen displays "Select Door to view" as shown in
the following example.
Select Door to
view: DR001
Type the appropriate door number or use the [Ð] and [Ï] keys to scroll the available doors. When the desired
door number appears on the screen, press [ENTER] to view and control the selected door number.
Door Control and Status Display
Each door will display the status of the door inputs that are controlling the door and the state of the lock output
that is controlled by the door configuration.
*Door 001
(Closed)(Locked)
Use the [Ð] and [Ï] keys to scroll the available doors while in the view screen, press the [1] key to unlock the
door for the programmed unlock time, press the [2] key to lock the door and press the [3] key to activate the
door latched. Press the [Í] to return to the Door selection display.
The display will show the door input states listed below.
CLOSED Door is closed
OPEN Door is open
FORCED Door is forced open
PREALM Door is in a pre-alarm open condition
LEFTOP Door has been left open