Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 265
The second setting to edit is the serial number. Enter the serial number using the numeric keypad. Pressing the
[2] or [3] keys repeatedly will allow the entry of digits A to F of a hexadecimal value. For more information about
hexadecimal data entry refer to the section Hexadecimal Data Entry (see page 335).
ZX001 Address
005
The third setting to edit is the address which is to be assigned. To enter the Address use the keypad as
explained in section Entering Decimal Numbers (see page 333) then press [ENTER]. Note that this will not
immediately affect the module. The address will only be checked and/or changed when the module next
attempts to register with the Controller.