Specifications

26 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
User Expiry Date
Setting an expiry date for the user will prevent the user from gaining access to the system past the date that is
set. Use this feature to program cards for temporary employees, trade people or contractors. This feature can
also be used for membership processing to prevent access once the membership period has expired.
UN00001 Expiry
date: --/--/----
Use the numerical keys to enter a valid date and then press [ENTER] to program the date. If you do not
program a time in the following section the user will expire at midnight on the date that is programmed. For
more information about entering the date information refer to the section Date and Time Data Entry (see page
334).
If you do not enter a valid date an error message will be shown, pressing the [STAY] key will allow you to clear
your entry or set the default value.
User Expiry Time
Setting an expiry time for the user will prevent the user from gaining access to the system past the date and
time that is set. If you have created a temporary user by programming the expiry date in the previous screen,
use the 24-hour clock method (i.e. 4:15pm = 16:15) to program the time that the user code (PIN) and its
programmed rights become invalid. If the expiry date in the previous screen is left blank, the system ignores the
time.
If the time screen is left blank, but an expiry date has been programmed, the user code (PIN) expires at
23:59.59 on the date programmed.
If the
Loiter Mode option is turned on for this user, the expiry time is ignored and the user code (PIN) expires at
23:59.59 on the programmed date.
Use this feature to program cards for temporary employees, trade people or contractors. This feature can also
be used for membership processing to prevent access once the membership period has expired.
UN00001 Expiry
time: --:--
Use the numerical keys to enter a valid time in a 24HR format and then press [ENTER] to program the time. If
you do not program a time in the following section the user will expire at midnight on the date that is
programmed. For more information about entering the date information refer to the section Date and Time Data
Entry (see page 334).
If you do not enter a valid time an error message will be shown, pressing the [STAY] key will allow you to clear
your entry.
User Family / Facility Number
When a user requires control of card readers and access functions in the Protege System they must be
programmed with a facility code or family number and a card number. The first screen shown will be the family
number of the access control card that will be given to the user, enter the family number of the card and then
press [ENTER].
UN00001 Facility
id: 4294967295
The family number is not normally printed on the card or tag. This is typically provided on a reference document
provided with the cards at the time they are purchased. If you are not sure of the facility code or card number
you can present the card to any reader that is programmed in the system. The facility or family id number that is
read will be displayed in the screen only if it is not already programmed or allocated to a user.
i
The number 4294967295 is the maximum facility code and is a reserved number, setting this number
will disable the card for this user.