Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 245
Elevator Control Mode
The control mode selects how the floor group will be controlled. This allows a door to be unlocked for the token
time, unlock latched or unlocked in the fire alarm mode.
FN001 Door Mode
Menu Timed
Use the [1] and [3] keys to scroll the door control mode until you reach the setting that you want to use and then
press [ENTER] to proceed to the next programmable option for the door control function. For more
information about the list control data entry refer to the section List Control Data Entry (see page 335).
Door Mode Description
Menu Timed The Floor Group will be unlocked for the token time that is programmed for the
programmable function. Use this mode when you want to unlock the door for defined
time. The floors will lock after the token time has expired.
Menu Latched The floors will be latched in the unlocked state and will remain unlocked until controlled
from:
 A LCD Keypad
 Protege System Management Suite
 Scheduled Action
 Area Status
 A Programmable function.
Fire Control The door will be latched in the fire control unlock state and will remain unlocked until
controlled from:
 A LCD Keypad
 Protege System Management Suite
 A Programmable function that is programmed to deactivate the fire alarm control.
Register Counter
To program the register counter function ensure that the function you have selected is halted. Select the
function type selection screen as shown below for Register Counter.
FN001 Func Type
Reg Counter
Use the [1] and [3] keys to scroll the function types until you reach the door control selection and press [ENTER]
to select the function type displayed and proceed to the next programmable option for the door control function.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Function Mode
The function mode determines how this function operates with the system controller. By default a function is set
to normal operation. Normal operation will mean the function is started if it was running when the system
restarts or is completely powered down (AC Failure and Battery Failure). The Run Once mode of operation will
allow the function to run once and then wait to be stopped and started by the user or operator.
FN001 Func Mode
Normal
Use the [1] and [3] keys to scroll the function mode until you reach the normal selection and press [ENTER] to
proceed to the next programmable option for the door control function. For more information about the list
control data entry refer to the section List Control Data Entry (see page 335).