Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 235
Stage 7 PGM
The seventh PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 7
pgm: --000:00
To modify the Stage 7 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Stage 8 PGM
The eigth PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 8
pgm: --000:00
To modify the Stage 8 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Door Control Function
To program the door control function ensure that the function you have selected is halted. Select the function
type selection screen as shown below for Door Control.
FN001 Func Type
Door Control
Use the [1] and [3] keys to scroll the function types until you reach the door control selection and press [ENTER]
to select the function type displayed and proceed to the next programmable option for the door control function.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Function Mode
The function mode determines how this function operates with the system controller. By default a function is set
to normal operation. Normal operation will mean the function is started if it was running when the system
restarts or is completely powered down (AC Failure and Battery Failure). The Run Once mode of operation will
allow the function to run once and then wait to be stopped and started by the user or operator.
FN001 Func Mode
Normal
Use the [1] and [3] keys to scroll the function mode until you reach the normal selection and press [ENTER] to
proceed to the next programmable option for the door control function. For more information about the list
control data entry refer to the section List Control Data Entry (see page 335).
Door Action
The action determines what action is performed on the door or door group that is programmed as a result of the
Input PGM. An action MUST be selected for the programmable function to operate correctly.
FN001 Action
None
Use the [1] and [3] keys to scroll the action types until you reach the required action that you want to be
performed and then press [ENTER] to proceed to the next programmable option for the door control function.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
y Follow and Test