Specifications

234 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Stage 1 PGM
The first PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 1
pgm: --000:00
To modify the Stage 1 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Stage 2 PGM
The second PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 2
pgm: --000:00
To modify the Stage 2 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Stage 3 PGM
The third PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 3
pgm: --000:00
To modify the Stage 3 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Stage 4 PGM
The fourth PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 4
pgm: --000:00
To modify the Stage 4 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Stage 5 PGM
The fifth PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 5
pgm: --000:00
To modify the Stage 5 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).
Stage 6 PGM
The sixth PGM in the 8 PGM outputs that can be programmed for the ripple control function.
FN001 Stage 6
pgm: --000:00
To modify the Stage 6 PGM, use the settings as explained in section Entering PGM and PGM Groups (see page
336).