Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 21
y Press [MENU, 7] to access the bypass menu. Accessing the bypass menu allows you to bypass zones and
trouble zones. Refer to the section Bypassing Zones (see page 279) for more information.
System Trouble
When arming the system, if a general, system or access trouble is present, the keypad momentarily displays a
trouble message and returns to the Area Status screen.
Cannot ARM Area
System Trouble
i
To prevent an area from arming when a trouble condition occurs, the No Arming On Trouble Condition
option must be turned on. For a description of the trouble conditions refer to the Trouble Group Table
(see page 96).
Area Busy
If the area is busy, either another user is arming or disarming the area at the same time or the system is busy
completing a task that cannot be interrupted by a user action.
Area Busy
Please wait...
Try the action again a few seconds later. If the area is no longer busy, you can perform your action that you
requested.
i
It is always good practice to verify that the area has not changed status because of a system or user
controlling the selected area.