Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 197
Telephone Number Name
If the selected telephone number has a name associated (some telephone numbers do not have a name
associated with them) the name programming screen will be shown.
PN001 Name
*Phone No 001
To scroll telephone numbers by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected
telephone number use the keypad as explained in section Entering Text and Names (see page 333) and press
[ENTER].
By default the telephone name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
Operating Schedule
The operating schedule for the telephone number determines when the telephone number is valid to be dialed
and if it will use a secondary telephone if the schedule is not valid. A schedule is a series of times and days that
can be programmed to prevent the operating of functions based on a 7 day week and 24 hour clock. For more
information on the programming of the schedule refer to the Schedule Programming section (see page 272).
The telephone number schedule allows you for example to report messages during a normal day (8am to 5pm)
to one telephone number or monitoring station and then outside of these hours reporting them to another
location.
PN001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the schedule displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Secondary Telephone Number
A secondary telephone number when programmed will be used when the schedule of the telephone number
that is being programmed is not valid. The schedule of the secondary telephone number must be valid or set to
none.
PN001 Secondary
None
Use the [1] and [3] keys to scroll the secondary telephone number selection and press [ENTER] to select the
telephone number displayed. For more information about the list control data entry refer to the section List
Control Data Entry (see page 335). Programming a secondary telephone number that uses the current
telephone number being edited will perform no function.
Telephone Number
Program the telephone number that you want to assign to this telephone number entry.
PN001 Number
Use the numeric keys [0] to [9] to enter the telephone number. When the number has been programmed press
the [ENTER] key. To clear the telephone number displayed press the [DISARM] key.
When using a telephone number that requires a number to be dialled before gaining an outside line program the
individual number or series of numbers in to a telephone number and call this 'PABX Access'. When
programming the service or function that requires the telephone number you will also be able to select a
telephone number for PABX access.