Specifications

196 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Device ID
Enter the Device ID for the BACnet service.
SV005 Device
04444
To modify the device ID use the keypad as explained in section Entering Decimal Numbers (see page 333) and
press [ENTER] to save the modified data.
Start PGM
This is the first PGM in a range of PGMs to which the BACnet binary values are mapped.
SV005 Start PGM
no: 00000
To modify the start PGM number use the keypad as explained in section Entering Decimal Numbers (see page
333) and press [ENTER] to save the modified data.
Total Number of PGMs
Enter the total number of PGMs (in a contiguous range) that will be mapped to BACnet binary values.
SV005 total PGM
no: 00008
To modify the total number of PGS setting use the keypad as explained in section Entering Decimal Numbers
(see page 333) and press [ENTER] to save the modified data.
Telephone Numbers
To access the telephone number programming menu login using a valid installer code and then select [MENU,
4, 7, 2]. The screen displays "Phone No to modify" as shown in the following example.
Phone No to
modify: PN001
Phone numbers are defined so that a telephone number and if required a secondary number depending on a
schedule can be assigned to a service that communicates using a modem or telephone connection.
Selecting a Telephone Number to Modify
Each telephone number is assigned a unique telephone number from 001 to 016. Your system will be limited to
specific number of telephone numbers that are defined in the selected profile. For information on profiles refer to
the Advanced Programming Section (see page 201).
Phone No to
modify: PN001
Type the appropriate 3-digit service number or use the [Ð] and [Ï] keys to scroll the available services. When
the desired service appears on the screen, press [ENTER] to program and control the selected service.