Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 195
Service Mode
The service mode determines how this service operates with the system controller. By default a service is set to
start with the operating system. Setting a service to "Start With The Operating System" (Start With O/S) allows
the service to operate automatically, if the system controller is reset or restarts. Manual control of the service
can be set by using the Manual option for the service mode.
SV001 Ser Mode
Start with O/S
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select the operating mode
displayed. For more information about the list control data entry refer to the section List Control Data Entry (see
page 335).
BACnet Service
The BACnet service allows external devices to monitor and control the state of PGMs on the Protege system.
For further information on the BACnet service please refer to
Application Note AN_087 BACnet IP Integration .
Service Mode
The service mode determines how this service operates with the system controller. By default a service is set to
start with the operating system. Setting a service to
Start With The Operating System (Start With O/S) allows the
service to operate automatically, if the system controller is reset or restarts. Manual control of the service can be
set by using the Manual option for the service mode.
SV001 Ser Mode
Start with O/S
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select the operating mode
displayed. For more information about the list control data entry refer to the section List Control Data Entry (see
page 335).
Primary IP Address
The primary IP address is the IP of the device to which the BACnet service will communicate.
SV001 Pri IP
000.000.000.000
To modify the IP address use the keypad as explained in section Entering Decimal Numbers (see page 333).
Press [ENTER] to save the Octet that is being entered and move to the next Octet or the next screen once all
four have been completed.
Primary Port
The primary port configures the TCP/IP port through which the BACnet communications will operate.
SV001 Primary
port: 47808
To modify the port configuration use the keypad as explained in section Entering Decimal Numbers (see page
333) and press [ENTER] to save the modified data.