Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 191
Events Options
The events options allow you to filter the type of events that this Report IP service will send to the monitoring
station.
SV001 Events
[123456--]
To modify options, use the keypad as explained in section Entering Data Options (see page 336).
Option 1 - Report Opens
y Enabled the service will report opens (Disarming) for the areas that are part of the area group assigned. An
area group of none will mean ALL areas will be sent using this service.
y Disabled the dialer will not report opens.
Option 2 - Report Closes
y Enabled the service will report closes (Arming) for the areas that are part of the area group assigned. An
area group of none will mean ALL areas will be sent using this service.
y Disabled the dialer will not report closes.
Option 3 - Report Alarms
y Enabled the service will report alarms for the zones that are part of the area group assigned. An area group
of none will mean ALL areas will be sent using this service.
y Disabled the dialer will not report alarms.
Option 4 - Report Tampers
y Enabled the service will report tampers for the zones that are part of the area group assigned. An area
group of none will mean ALL areas will be sent using this service.
y Disabled the dialer will not report tampers.
Option 5 - Report Restore
y Enabled the service will report restores for the zones that are part of the area group assigned. An area
group of none will mean ALL areas will be sent using this service.
y Disabled the dialer will not report restores.
Option 6 - Report Bypass
y Enabled the service will report bypasss for the zones that are part of the area group assigned. An area
group of none will mean ALL areas will be sent using this service.
y Disabled the dialer will not report bypass's.
Option 7 and 8 - Reserved
y Reserved do not modify
Data Options
The data options are used to log information that is received, make the DVACS service respond to an all call
code or respond to odd/even all call requests.
SV001 Data
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 336).
Option 1 - Log Acknowledge Events
y Enabled the service will log acknowledge communication events.
y Disabled the service will not log acknowledge communication events.