Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 189
Account Number
The account number for the Report IP Service can be up to 8 digits. An account code with leading zeros will be
truncated to send the minimum number of digits, for example the account code 004311 will be sent as 4311.
Where there are more digits set in the account code than the format that is selected can send the account
number will be truncated.
SV001 Account
no: 00000000
To modify the account number (setting an account code of 00000000 will disable the service), use the keypad
as explained in section Entering Hexadecimal Numbers (see page 335) and press [ENTER]. An area that has an
account code set will be used in place of the account code in the service. Verify the account code sending
options to see how the account code can be masked with the upper 8 digits (this allows a trouble area to be
routed to a service technician automatically).
Primary IP Address
The primary IP address is the IP of the server that has the receiver attached, the receiver can be the Armour IP
Server or a IP receiving device.
SV001 Pri IP
000.000.000.000
To modify the IP address use the keypad as explained in section Entering Decimal Numbers (see page 333).
Press [ENTER] to save the Octet that is being entered and move to the next Octet or the next screen once all
four have been completed.
Primary Port
The primary port configures the reporting service with the remote port number to communicate on. Consult the
documentation provided with the Receiver software or hardware to find this information. This information may
also be different based on how the device is connected to the internet or intranet that you are communicating
on.
SV001 Primary
port: 09647
To modify the port configuration use the keypad as explained in section Entering Decimal Numbers (see page
333) and Press [ENTER] to save the modified data.
Secondary IP Address
The secondary IP address is the IP of the server that has the receiver attached and can be set so that it will be
routed through a separate connection. For example a ADSL modem maybe used for primary and a wireless
connection for the secondary communications. For higher security it may also be desirable to have two service
providers of internet.
SV001 Sec IP
000.000.000.000
To modify the IP address use the keypad as explained in section Entering Decimal Numbers (see page 333).
Press [ENTER] to save the Octet that is being entered and move to the next Octet or the next screen once all
four have been completed.