Specifications

184 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Intercom 1 Address
The intercom 1 address defines the address received by first intercom slot, up to 4 intercoms can be decoded
simultaneously. In some instances certain intercoms are not able to unlock a elevator floor. By configuring the
intercom address only the intercoms that are to be used for elevator access are able to be decoded.
SV001 Intercom 1
address: 255
To modify the intercom address (000 to 255, a setting of 255 will result in this address slot being disabled), use
the keypad as explained in section Entering Decimal Numbers (see page 333) and press [ENTER].
Intercom 2 Address
The intercom 2 address defines the address received by second intercom slot, up to 4 intercoms can be
decoded simultaneously. In some instances certain intercoms are not able to unlock a elevator floor. By
configuring the intercom address only the intercoms that are to be used for elevator access are able to be
decoded.
SV001 Intercom 2
address: 255
To modify the intercom address (000 to 255, a setting of 255 will result in this address slot being disabled), use
the keypad as explained in section Entering Decimal Numbers (see page 333) and press [ENTER].
Intercom 3 Address
The intercom 3 address defines the address received by third intercom slot, up to 4 intercoms can be decoded
simultaneously. In some instances certain intercoms are not able to unlock a elevator floor. By configuring the
intercom address only the intercoms that are to be used for elevator access are able to be decoded.
SV001 Intercom 3
address: 255
To modify the intercom address (000 to 255, a setting of 255 will result in this address slot being disabled), use
the keypad as explained in section Entering Decimal Numbers (see page 333) and press [ENTER].
Intercom 4 Address
The intercom 4 address defines the address received by fourth intercom slot, up to 4 intercoms can be
decoded simultaneously. In some instances certain intercoms are not able to unlock a elevator floor. By
configuring the intercom address only the intercoms that are to be used for elevator access are able to be
decoded.
SV001 Intercom 4
address: 255
To modify the intercom address (000 to 255, a setting of 255 will result in this address slot being disabled), use
the keypad as explained in section Entering Decimal Numbers (see page 333) and press [ENTER].