Specifications

144 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Floor
Each floor is assigned a unique floor number in the Protege System. Each elevator can have a maximum of 128
floors. Floors are given a name that is used when generating events and reporting information.
Floor to
modify: FL001
To access elevator programming, login using a valid code that has access to the floor programming menu and
then select [MENU, 4, 5, 3]. The screen will then prompt you to "Select a Floor to modify" requesting that you
enter a floor number. Type the appropriate 3-digit floor number or use the [Ð] and [Ï] keys to scroll the
available floors. When the desired floor number appears on the screen, press [ENTER] to program the selected
floor. The maximum number of floors that can be programmed is limited by your system's memory and
configured profile.
To browse the floors by name press [ENTER] when prompted for a floor number to modify and then use the [Ð]
and [Ï] keys to scroll the available floors by their name.
Selecting a Floor to Modify
Each floor is assigned a unique door number from 001 to 250. Your system will be limited to specific number of
floors that are defined in the selected profile. For information on profiles refer to the Advanced Programming
Section (see page 201).
Floor to
modify: FL001
Type the appropriate 3-digit floor number or use the [Ð] and [Ï] keys to scroll the available floor numbers.
When the desired floor number appears on the screen, press [ENTER] to program the selected floor number.
The maximum number of floors that can be programmed is limited by your system's memory and configured
profile.
Floor Name
If the selected floor has a name associated the name programming screen will be shown.
FL001 Name
*Floor 001
To scroll floors by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected floor use the
keypad as explained in section Entering Text and Names (see page 333) and press [ENTER].
By default the floor name will be prefixed by an '*' this indicates that the name is an editable name in the
system.