Specifications

138 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Door Type
Each door type is assigned a unique door type address. There are four default door types that will cover nearly
all the configurable options. To access door type programming, login using a valid code that has access to the
door type programming menu and then select [MENU, 5, 2]. The screen will then prompt you to "Select a door
type to modify" requesting that you enter a door type number. Type the appropriate 3-digit door type number or
use the [Ð] and [Ï] keys to scroll the available door types.
Door type to
modify: DT001
When the desired door type number appears on the screen, press [ENTER] to program the selected door type.
The maximum number of door types that can be programmed is limited by your system's memory and
configured profile.
To browse the door types by name press [ENTER] when prompted for a door type number to modify and then
use the [Ð] and [Ï] keys to scroll the available door types by their name.
Selecting a Door Type to Modify
Each door type is assigned a unique door type number from 001 to 064. Your system will be limited to specific
number of door types that are defined in the selected profile. For information on profiles refer to the Advanced
Programming Section (see page 201).
Door type to
modify: DT001
Type the appropriate 3-digit door type number or use the [Ð] and [Ï] keys to scroll the available door type
numbers. When the desired door type number appears on the screen, press [ENTER] to program the selected
door type number. The maximum number of door types that can be programmed is limited by your system's
memory and configured profile.
i
It is recommended NOT to modify the door types DT001 to DT004. These are assigned by default to
all doors. When scheduling door type operation or altering default settings use the door types from
DT005 and above.
Door Type Name
If the selected door type has a name associated (some door types do not have a name associated with them)
the name programming screen will be shown.
DT001 Name
Card Only
To scroll door types by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected door
type use the keypad as explained in section Entering Text and Names (see page 333) and press [ENTER].
By default the door type name will be prefixed by an '*' this indicates that the name is an editable name in the
system. Some door types do not have names, this is limited by the system memory and the profile configured.
Operational Schedule
The door type schedule allows a door type to be scheduled for use during a certain time period. For example
setting a door type schedule for card only from between 9am and 5pm and then a secondary door type of Card
and Pin will mean during the hours of 9am and 5pm any door assigned the door type will require card only
access during 9am and 5pm however outside this time will require a card access and pin number. Use this
option to increase the security of the main entry doors after hours while maintaining a faster traffic flow during
working hours.
DT001 Schedule
None