Specifications

130 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Door Name
If the selected door has a name associated (some doors do not have a name associated with them) the name
programming screen will be shown.
DR001 Name
*Door 001
To scroll doors by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected door use the
keypad as explained in section Entering Text and Names (see page 333) and press [ENTER].
By default the door name will be prefixed by an '*' this indicates that the name is an editable name in the
system. Some doors do not have names, this is limited by the system memory and the profile configured.
Door Type Selection
The door type selection allows the door to function in different modes. These modes require the user to present
specific credentials for example a card, card and pin, card or pin and pin only. By using a door type these can
be scheduled dependent on the time of day allowing different security credentials to be used.
DR001 Type
Card Only
Use the [1] and [3] keys to scroll the door type selection and press [ENTER] to select the door type displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Slave Door
The slave door will follow the primary door (this door) when it unlocks and locks. This can be used to operate a
second door that is required to gain access only when a specific entry path is used. For example to gain access
to a door a you must access door b.
DR001 Slave
None
Use the [1] and [3] keys to scroll the slave door selection and press [ENTER] to select the slave door displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Setting a slave door that is the same as the door being programmed will have no affect.
Interlocking Group
The interlocking group is assigned to a door that can not opened or accessed when any of the doors assigned
in the interlocking group are not secure. Access will be denied to the user based on an interlock.
DR001 Interlock
None
Use the [1] and [3] keys to scroll the interlock door group selection and press [ENTER] to select the interlock
door group displayed. For more information about the list control data entry refer to the section List Control Data
Entry (see page 335).