Installation manual

15.2 Installer Menu

To enter the Installer menu press the ENTER key ( ), then enter the four digit Installer code.

Key Sequence Descripon

,1, 1, View the Entry Delay Timer

,1, 1, [T1], [T2], [T3], Change the current Entry Delay Timer

,1, 2, View the current Exit Delay Timer

,1, 1, [T1], [T2], [T3], Change the current Exit Delay Timer

,1, 3, View the current Siren Timer

,1, 1, [T1], [T2], [T3], Change the current Siren Timer

,2, 1, [toggle opons], General sengs

Opon Descripon Default

1 Enable EOL Zone Opon (1k + 1k) Disabled

2 Enable Duplex Zone opon (8 zones) Disabled

3 Beep on trouble condion Disabled

4 Power up disarmed Disabled

5 Reserved Disabled

6 PGM output follows alarm state Enabled

7 PGM output follows area state Disabled

8 PGM output inversion Disabled

,2, 2, [toggle opons], Arming Opons

Opon Descripon Default

1 Allow Fast Regular arming Enabled

2 Allow Fast Stay arming Enabled

3 Allow Instant Arming during Stay exit Enabled

4 Allow Fast Force arming Enabled

5-8 Reserved Disabled

,2, 3, [toggle opons], Reporng Opons

Opon Descripon Default

1 Report Arming and Disarming Enabled

2 Report Alarms Enabled

3 Report Zone Bypass Disabled

4 Report Zone Fault Disabled

5 Report User Menu access Disabled

6 Report Local Install Menu access Disabled

7 Report Extended Informaon Disabled

8 Reserved Disabled