Installation manual

Opon Descripon

User Name Any name that will help to idenfy the user. This name is only displayed in the

Protégé® Soware and used as a reference for the property manager.

PIN Number The four digit code that this user will use to arm and disarm the keypad as well

as to access the menus.

Family/Card Number Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

Arm Only User When enabled, allows the user code to be used only for arming the EliteSuite®

System. When disabled, allows the user code to arm and disarm the EliteSuite®

System.

Allow Menu Access When enabled, allows the selected user to access the User Setup menu and

modify the codes and opons of all other users. When disabled, prevents

access to the User Setup menu.

Disarm on Single Badge Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

Arm on 3 Badge Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

3 Badge Latch Door Toggle Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

3 Badge Latch Door 2 Hours Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

3 Badge Latch Door 4 Hours Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

3 Badge Latch Door 8 Hours Not relevant to and not used by the Protégé® EliteSuite® Eclipse LED Keypad.

If ‘User 8 Duress Code Enabled’ is selected(refertoOponsSetuponpage38) then the PIN for

User 8 becomes the duress code.