Installation manual

Opon 4 - Report Zone Fault

• Enabled, the system will report any zone fault trouble condion to the system controller. This

will not indicate the zone that has the fault as this will be shown on the local keypad and in the

trouble view menu.

• Disabled, no zone fault message will be sent.

Opon 5 - Report User Menu Access

• Enabled, the system will report when the master user has accessed the main menu.

• Disabled, no message will be sent when the master access’s the main menu.

Opon 6 - Report Local Installer Access

• Enabled, the system will report when the local installer code is used to gain access to the local

installaon opons.

• Disabled, no message will be sent when the installer access’s the installer menu.

Opon 7 - Report Extended Informaon

• Enabled, the system will report extended informaon such as the device tamper and re loop

trouble condions. These condions do not generate an alarm in the system locally but can be

used to generate an event at the local monitoring or remote monitoring centre alerng the

operator to a potenal problem.

• Disabled, no message will be sent when the extended funcons are triggered.

Opon 8 - Reserved

It is recommended not to enable/disable or modify the sengs of reserved

opons.