Installation manual

12.2ArmingOpons(Menu2,2)

Step 1

The Arming Opons set funcons that relate to the arming of the EliteSuite® System. To enter the

Arming Opons menu enter the following key press sequence:

, 2, 2

The currently assigned values will be displayed using the Number LED’s.

Step 2

To toggle opons press the keys 1 to 8, and the corresponding number LED will be lit when that

opon is enabled.

Step 3

Pressing the ENTER key ( ) will save the opons. Pressing the MENU key ( ) will abort the

operaon without saving any changes.

The available opons are:

Opon 1 - Allow Fast Regular Arming

• Enabled, the system can be fast armed by pressing and holding the ARM key ( ).

• Disabled, fast arming is disabled.

Opon 2 - Allow Fast Stay Arming

• Enabled, the system can be fast stay pressing and holding the STAY key (1).

• Disabled, fast stay arming is disabled.

Opon 3 - Allow Instant Arming During Stay Exit Delay

• Enabled, the system will allow the STAY key (1) to be pressed and held during the exit delay of a

stay arming cycle to allow the stay arming to be changed to an instant arm.

• Disabled, fast stay arming is disabled.

Opon 4 - Allow Fast Force Arming

• Enabled, the system can be fast force armed by pressing and holding the FORCE key (2).

• Disabled, fast force arming is disabled.

Opon 5, 6, 7 and 8 - Reserved

It is recommended not to enable/disable or modify the sengs of reserved

opons.