Installation manual

9.5FirmwareVersion(Menu4)

The Protégé® EliteSuite® Eclipse LED Keypad contains two microprocessors each with it’s own

rmware.

Step 1

To view the version of rmware that is installed in the main microprocessor enter the following key

press sequence:

, 4, 1,

The main microprocessor rmware version will be displayed as a sequence of four Number LED’s

lighng one aer the other. The rst two digits are the major version number and the second two

digits are the minor version number.

Step 2

To view the version of rmware that is installed in the keypad microprocessor enter the following

key press sequence:

, 4, 2,

The keypad microprocessor rmware version will be displayed as a sequence of four number LED’s

lighng one aer the other. The rst two digits are the major version number and the second two

digits are the minor version number.

9.6DeviceDefault(Menu5)

Step 1

To Default all the Device Opons enter the following key press sequence:

, 5

The ARMED LED will now ash more rapidly.

Step 2

Press the ENTER key ( ) to conrm or the MENU key ( ) to cancel.

9.7ExingDeviceConguraonMode

Step 1

Once Device Conguraon is complete, press the CLEAR key ( ) to restart the keypad.

If you do not press any key for 45 seconds while in Device Conguraon mode, the

keypad will automacally restart.