Installation manual

6.5 Zone Display
The Protégé® EliteSuite® Eclipse LED Keypad features an easy to use eight zone display.
When not using the menu system for programming opons or modifying user accounts, your
keypad will display the status of each programmed zone by lighng the corresponding number on
the display. The three status opons shown are:
State Descripon
O Complete power failure.
On The system is powered and operang normally.
Flashing There is a trouble condion present.
State Descripon
O Normal operaon.
Flashing The concierge is requesng your aenon.
6.2 Ready Indicator
State Descripon
O One or more zones in the system are open and the system cannot be Regular
Armed.
On The system has all zones closed and is ready to be armed.
Flashing The system has begun arming and is in Exit Delay mode to allow exit from the
premises by ignoring all zone acvaons unl the Ready indicator stops ashing.
6.3 Power/Trouble Indicator
6.4 Message Indicator
State Descripon
O The zone is closed.
On The zone is open.
Flashing The zone is operang incorrectly.
12