Installation manual

6.0 Indicator Lights
The Protégé® EliteSuite® Eclipse LED Keypad features four status indicator lights and eight zone
indicator lights showing the condion of the EliteSuite® Security System.
Arm/Armed Power/Trouble
Ready
Message
Zone Indicators
Figure 13 - Indicator Lights
State Descripon
O The system is disarmed.
On The system is armed and you may enter your User code to disarm.
On with keypad eming a
connuous tone
The system is armed and has entered the Entry Delay state.
You must enter your User code to disarm.
Flashing regularly The system is in an alarm state caused by acvaon of zone(s)
while armed or the use of the Panic or Medical Alarm keys.
...
...
Flashing three ashes then
pausing
The system is in an alarm state caused by acvaon of re zone(s).
You must enter your User code to acknowledge this alarm.
........ ........
Flashing a brief pulse every
2.5 seconds
The last alarm that occurred has been stored in the system
memory. To view which zone(s) triggered the alarm, follow the
instrucons in the memory secon of the user menu informaon
of this booklet. This indicator will be cleared the next me you arm
your system or clear the memory via the System menu.
... ... Flashing 200ms on, 600ms o The system menu is currently acve.
6.1 Arm/Armed Indicator
11