Instructions
HOW TO INSTALL YOUR BALUSTRADE
tsr fi eht llatsni ,dne eno ta gnitratS .1
panel. Fix securely to a wall (A), or fi t
an End Post (B) if required.
eht gnitresni yb lenap txen eht tiF .2
sleeve into the Top Capping (B).
Fit the Panel Bracket to the bottom
capping before fi xing in place. (C).
Fix in place using
88
X
mm tek
screws or
4
8
X
mm large fl ange
aluminium rivets. Use a minimum of
3 fi xings per rail. Repeat with other
panels, ensuring panels are straight,
level and fi tted together correctly.
.roo fl ot stsop lla eruceS .3
For concrete, secure with
M
1
X
1
mm stainless steel
dyna-bolts or chem-set studs (Pic D).
For timber secure with M
1
X
1
mm
coach screws into joists
or M
1
X
1
mm bolts and nuts
if securing from underneath.
Fit chocks under the deck and use
large fl at washers between nuts and
timber (Pic E). Securely tighten and
check for rigidity.
stsop dne dna renroc xiF .4
as required.
BALUSTRADE SPECIFICATIONS
Standard Panels – 2000mm wide (including fi xed post) x 1010mm high
Corner Posts –
5
X
5
X
mm fl anged bottom – sleeved top (90˚)
End Posts –
5
X
5
X
mm fl anged bottom – sleeved top (1-way)
Top Rail Panel Bracket
5
X
5
single lug (2-hole
Bottom Rail Panel Bracket
3
X
5
single lug (2-hole)
C
Coach Screw Bolt & Nut
Flat Washer
Block
Joist
Decking
E
BOTTOM
B
TOP
BOTTOM
TOP
A
D
Use 4 fi xings per post
9 338 797 0 2 0 8 1 1