Instructions

Josh and Jenna show you how
at www.protectoraluminium.com.au
Pool/Garden Fence
Installation Guide
Balustrade must comply with Standard AS/NZ1170.1:2002
Please check with your local Council regarding specifi c requirements.
Tools Required: Pencil, String-line, Tape Measure, Spirit Level, Drill, Spanners,
Tek Gun/Drill, Angle Grinder/Hacksaw
GETTING STARTED
Calculate the number of panels and posts required.
Mark the position of each fl anged post.
Panels fi xed to a wall will need a Top Rail Panel Bracket.
ADJUST TO FIT
eveels eht rof ecaps mm05 gnidulcni shtgnel laiceps yna kraM .1
and panel bracket. Cut the rails to the required length
dex fi eht tuc ot yrassecen eb yam ti tsop renroc a gnitt fi nehW .2
post off the next panel.
Balustrade Installation
2000mm
1010mm
100mm end
post
corner
post
sleeve
50mm
sleeve
50mm
Top
view
Panel
incorporates
1 post
Leave min. 50mm
CUT
CUT
Panels
sleeve
onto
corner
post
TOP
BALUSTRADE
INSTALLATION GUIDE
fi xed post
BOTTOM
2020v2
PTS 100101
bunnings.co.nz