Operating instructions

Assigning Functions to Assignable Switches
151
Chapter 6 Menu and Detailed Settings
a) When the digital extender function is turned on, it is
not possible to show the return video.
Color Temp SW 6300K Adjust the white balance with a 6300K preset value. Setting retained
Electrical CC Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance adjustment
values.
Each press of the switch or button switches in the order
3200Kt4300Kt5600Kt6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
Note
This function is not available when “MAINTENANCE” >
“White Filter” >ND Filter C.Temp” in the setup menu is set to
“On.”
If you set “ND Filter C.Temp” to “On” after assigning the
function, the assignable switch ceases to function.
Setting retained
CC5600K Apply a 5600K electrical CC filter to white balance
adjustment values.
Setting retained
Clip Continuous Rec Turn the Clip Continuous Rec mode on or off. Setting not retained
Slot Select When both slots A and B have recording media inserted in
them, select the media to use.
—
Digital Extender
a)
Turn the screen magnification function on or off when the
optional CBK-CE01 50 Pin Interface and Digital Extender
is installed.
Setting not retained
Assignable switch
setting
Function State when camcorder
is next powered on