Operating instructions

Assigning Functions to Assignable Switches
150
Chapter 6 Menu and Detailed Settings
BRT Disp Turn the display of the brightness level on or off. Setting retained
Histogram Turn the histogram display on or off. Setting retained
Lens Info Switch the depth of field indication between off, displayed
in meters, and displayed in feet.
Setting retained
Zoom Tele/Wide When a lens that supports serial communication is
installed, assign the Zoom Tele function to ASSIGNABLE
4, and assign the Zoom Wide function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
—
Zoom Wide/Tele When a lens that supports serial communication is
installed, assign the Zoom Wide function to ASSIGNABLE
4, and assign the Zoom Tele function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
—
Manual Focus Assist Turn the manual focus assist function on or off. Setting retained
Focus Mag Turn the focus magnification function on or off. Setting not retained
Zebra Turn zebra display on or off. Setting not retained
Lens RET Display return video signals when the optional CBK-CE01
is installed and a camera control unit is connected.
When a camera control unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review
(if playback is allowed).
—
Return Video
a)
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor and camera control unit are connected.
—
Return Video2 Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
—
Return Video3 Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
—
Return Video4 Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
—
Shot Mark1 Write Shot Mark1. —
Shot Mark2 Write Shot Mark2. —
OK Mark Add or delete an OK mark. —
Clip Flag OK Add/Clear an OK flag to/from the clip being recorded or
played.
Setting not retained
Clip Flag NG Add/Clear an NG flag to/from the clip being recorded or
played.
Setting not retained
Clip Flag Keep Add/Clear a KP flag to/from the clip being recorded or
played.
Setting not retained
Color Temp SW 3200K Adjust the white balance with a 3200K preset value. Setting retained
Color Temp SW 4300K Adjust the white balance with a 4300K preset value. Setting retained
Color Temp SW 5600K Adjust the white balance with a 5600K preset value. Setting retained
Assignable switch
setting
Function State when camcorder
is next powered on