Operating instructions

Menu List
142
Chapter 6 Menu and Detailed Settings
Wi-Fi Setting
Makes settings for
Wi-Fi connection.
Notes
• The CBK-WA01
Wi-Fi Adapter is
required.
• This item is
disabled (displayed
in grey) during
recording and play.
For details on Wi-Fi
connection, refer to
“Using a Wi-Fi
Adapter” (page 76).
Encryption Disable/WEP/TKIP/AES Selects whether to apply data
encryption and the type of data
encryption.
Disable: Do not apply data
encryption.
WEP: Apply WEP (Wired
Equivalent Privacy) when
“Authentication” is set to
“Open” or “Shared”
TKIP: Apply TKIP (Temporal Key
Integrity Protocol) when
“Authentication” is set to
“WPA” or “WPA2”
AES: Apply AES (Advanced
Encryption Standard) when
“Authentication” is set to
“WPA” or “WPA2”
WEP Key Index 1/2/3/4 When “Encryption” is “WEP,”
selects the key index.
Input Select When “Encryption” is set
to “WEP”: ASCII5,
ASCII13, HEX10,
HEX26
When “Encryption” is set
to “TKIP” or “AES”:
ASCII8-63, HEX64
Selects the input format depending
on the network key (or security key).
ASCII5: Five characters ASCII
format
ASCII13: 13 characters ASCII
format
HEX10: 10 hexadecimal digits
HEX26: 26 hexadecimal digits
ASCII8-63: 8 to 63 characters
ASCII 8-bit format
HEX64: 64 hexadecimal digits
(characters)
Key Sets the network key (or security
key).
Set Enables settings for “Wi-Fi Setting”
when “Wi-Fi” is set to “Enable”
(execute by selecting “Execute”).
Wi-Fi Status xxxxx
Connecting
Displays “Connecting” while
connection is being attempted.
Displays black squares to show the
connection status by the number of
squares when the camcorder is
connected to a computer or a LAN.
Wireless Mode 802.11b/802.11g/802.11n Displays an IEEE802.11 standard.
Wi-Fi Enable/Disable Selects whether to enable or disable
Wi-Fi connection.
Wi-Fi Remote
On/Off
Select “On” when using the Wi-Fi
remote commander.
Note
Unselectable when “Wi-Fi” is set to
“Disable.”
MAINTENANCE
Menu items Sub-item Settings Description