Operating instructions

Menu List
141
Chapter 6 Menu and Detailed Settings
Network Setting
a)
Makes settings for
network connection.
Notes
• The CBK-WA01
Wi-Fi Adapter is
required.
• This item is
disabled (displayed
in grey) during
recording and play.
For details on Wi-Fi
connection, refer to
“Using a Wi-Fi
Adapter” (page 76).
DHCP Enable/Disable Selects whether to acquire the IP
address automatically from a DHCP
server (“Enable”) or not
(“Disable”).
IP Address 0.0.0.0 to
255.255.255.255
(192.168.1.10)
When “DHCP” is set to “Disable,”
sets the IP address.
Subnet Mask 0.0.0.0 to
255.255.255.255
When “DHCP” is set to “Disable,”
sets the subnet mask.
Default Gateway 0.0.0.0 to
255.255.255.255
When “DHCP” is set to “Disable,”
sets the default gateway.
User Name admin Sets a desired user name in 1 to 31
alphanumeric characters.
Password pmw-400 (model name) Sets a password (model name) in 0
to 31 alphanumeric characters.
Set Execute/Cancel Confirms the settings in “Network
Settings” (execute by selecting
“Execute”).
MAC Address Displays the MAC address.
Net Config Reset Execute/Cancel Resets the settings in “Network
Settings” to the preset values
(execute by selecting “Execute”).
Wi-Fi Setting
Makes settings for
Wi-Fi connection.
Notes
• The CBK-WA01
Wi-Fi Adapter is
required.
• This item is
disabled (displayed
in grey) during
recording and play.
For details on Wi-Fi
connection, refer to
“Using a Wi-Fi
Adapter” (page 76).
Scan Networks Execute/Cancel When “Wi-Fi” is set to “Enable,”
scan the available network
connection.
SSID Network connection
name
Sets the network connection name
of up to 32 characters.
Network Type Infra/Adhoc Selects the connection mode.
Infra: Infrastructure mode
Adhoc: Ad hoc mode
Ch 1 to 11 When “Network Type” is set to
“Adhoc,” set the wireless channel.
Authentication Open/Shared/WPA/
WPA2
Selects the network authentication.
OPEN: Open system authentication
SHARED: Shared key
authentication
WPA: WPA (Wi-Fi Protected
Access) authentication
WPA2: WPA2 (Wi-Fi Protected
Access 2) authentication when
“Network Type” is set to
“Infra”
MAINTENANCE
Menu items Sub-item Settings Description