Operating instructions

Menu List
122
Chapter 6 Menu and Detailed Settings
Clip
Make settings for clip
name or clip
management.
Number Set 0001 to 9999 Specifies the initial value of the
numeric part (four digits) of clip
names (unless the name specified in
planning metadata with “Auto
Naming” set to “Plan”).
Name Display Off/On Selects whether to display the name
of the next clips to be recorded in E-
E mode (“On”) or not (“Off”).
Update Media<A>/Media<B> Updates the management files on the
media in the selected slot (execute
by selecting “Execute”).
Plan.Metadata
Makes settings for
operating planning
metadata.
Load/Slot(A) Execute/Cancel Executes load of planning metadata
from the SxS memory card in slot A.
Select “Execute” to show the list of the
planning metadata files stored in the
slot A SxS memory card and select a
file to execute the load.
Load/Slot(B) Execute/Cancel Executes load of planning metadata
from the SxS memory card in slot B.
Select “Execute” to show the list of
the planning metadata files stored in
the slot B SxS memory card and
select a file to execute the load.
Load/USB
(in UDF mode only)
Execute/Cancel Executes load of planning metadata
from the USB flash drive connected
to the external device connector.
Select “Execute” to show the list of
the planning metadata files stored in
the USB flash drive and select a file
to execute the load.
Properties Execute/Cancel Displays the detailed information in
the planning metadata loaded on the
camcorder (execute by selecting
“Execute”).
Clear Execute/Cancel Clears the planning metadata loaded
on the camcorder (execute by
selecting “Execute”).
Clip Name Disp Title1(ASCII format)
Title2(UTF-8 format)
Selects the display mode of the clip
name specified in planning metadata
(see page 89).
Note
When you define both of ASCII format
name and UTF-8 format name with
planning metadata, the UTF-8 format
string is used as the clip name string. If
you define either of ASCII format name
and UTF-8 format name with planning
metadata, the defined format name is
displayed though it is not selected by
menu setting.
OPERATION
Menu items Sub-item Settings Description