Instruction Manual

9
PROTECH SORADIO
3 RADIO CONFIGURATION
3.1 Configuration using the CONNECT RADIO COORDINATOR
1. Enable radio, see §3.2.Activate the radio on the SORADIO.
Note: By default, the radio is disabled.
2. Refer to manual CONNECT RADIO COORDINATOR NT400 to start radio search.
3. SORADIO settings and status from UNIVERSAL MAXIBUS
A. Product Name: Possibility to customize the name of the connected product.
Change the name and click SAVE.
B. Reading network address RS485 (unused in SORADIO).
C. Input management:
For each input, it is possible to:
• Customize the name of the input.
• Enable / disable input.
• Input ejection.
To apply changes, click on SAVE.
Enable input
Input enabled Input disabled
Eject input Input not ejected Input ejected
A
B
C
D