Specifications
78
Digital Controls
FEATURES & BENEFITS
n
Excellent Speed Regulation: 0.05% speed regulation of set speed provides for tight control
throughout a 200:1 speed range.
n
Pushbutton Programming: Three front panel pushbuttons provide quick and easy programming.
n
4-Digit LED Display: Red 0.5 inch (13 mm) wide digits for good visibility.
n
Programmable Decimal Point: Makes specific application readouts easy.
n
Inhibit Terminal: A low voltage, dry contact closure on the inhibit terminal will reduce the output to zero.
n
Selectable Feedback Devices: Controls accept magnetic pickup, hall effect, inductive proximity sensor or encoder input.
n
+ 5 VDC or + 12 VDC (10 mA) Power Supply: Provided to power feedback devices.
Minarik’s DLC600 precisely controls
your closed loop application speed. The
DLC600’s dual voltage capability
allows it to replace Minarik’s older DLC
products. An encoder or proximity
switch, hall effect sensor, or electromag-
netic pickup can provide the necessary
feedback. Any engineering units, from
revolutions per minute, to widgets per
day can be used to display and program
the speed. The large 4-digit LED display
allows you to easily see exactly what
speed you are running. When it comes
to low-cost closed loop control, the
DLC600 is your solution.
DLC Dimensions
Typical Applications
*System speed range may be limited by other factors, such as motor type, drive type, feedback resolution, etc.
DLC Series Specifications
•115 or 230
(VAC) ±10%
•50/60 HZ,
Single phase
5.5 watts
nominally
•Hall Effect Sensor
•Electromagnetic Pickup
•5 or 12 VDC NPN-type
encoder or proximity switch
•Encoder
0 to +10 VDC
Analog Output
Voltage Range
Acceptable Feedback
Sources
AC Line
Power
AC Line
Voltage
DLC600
Model
Power Supply
Voltage for
Feedback Devices
+5 VDC or +12
VDC @ 10 mA
Speed
Regulation
0.05%
Feedback
Frequency
Range
10 to
3000Hz*
All dimensions in inches [millimeters]
3.75 [95]
2.13 [54]
0.25 [6]
3.38 [86]
0.85 [22]
4.53 [115]
1.73
[44]
DLC600
DLC Series
n Food Processing
Equipment
n Material Handling
Equipment
n Conveyors
n Winding Machinery
n Film Processors
n Extruders
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
J
ACCESSORIES