Specifications
FEATURES & BENEFITS
8
7
115 mm and Nema 42
Brushless Servo Motors
BOSS Motor Series
The BOSS brushless motor series is a comprehensive motor line
designed for use in a variety of demanding applications.
Brushless motors have no brushes to wear out or maintain.
High quality ball bearings are the only mechanical linkage
between the stator and rotor. Commutation is achieved through
a feedback device such as Hall Effect sensors or an encoder.
These high-energy servomotors provide excellent and cost effec-
tive performance by combining Neodymium Iron Boron mag-
nets with low inertia rotors.
Although the BOSS motors on this page can be used with other
trapezoidal brushless DC drives we recommend they be
matched with our BOSS08 brushless DC drives.
If your application requires additional torque, Gator gear heads
mount directly to the BOSS Nema (N) versions.
n Compatible with BOSS08 brushless drives.
n Neodymium Iron Boron permanent magnets.
n Insulation Class F.
n IP65, TENV enclosure.
n IP64, shaft rating.
n Keyed shaft.
n 115mm frame sizes.
n Nema 42 mountings with “N” suffix.
n Flying leads.
n Thermal sensors.
*Additional specifications are on page 73, including ratings when matched to Minarik brushless drives.
Note:1) Tolerance on resistance and inductance is ±10%. Tolerance on Ke and Kt values are ±15%/-5%
Feedback Devices (XX). Standard is 08
- 08 = Hall Effect sensor feedback
- 10 = 1000 ppr encoder with U,V,W, commutation tracks,
line driver output, +5VDC, 20mA.
- 20 = 2000 ppr encoder with U,V,W, commutation tracks,
line driver output, +5VDC, 20mA.
Continuous TQ
Peak TQ
º
BOSS Motor Specifications*
Model No.
Max
Terminal
Voltage
(VDC)
Peak
(in-lb)
Therm.
(ºC/W)
Weight
(lb)
530-XX-412(N)
530-XX-420(N)
530-XX-426(N)
Max
No Load
Speed
(RPM)
Torque
Cont.
(in-lb)
Peak
(A)
Current
Res.
(ohms)
Ind.
(mH)
Inertia
(in-lbs²)
Cont.
(A)
260
380
530
6000
6000
6000
94
139
139
33
46
46
30
50
22
8.8
8.5
6.2
1.29
1.5
2.9
6.9
9.4
18
.0025
.0035
.0035
.79
.74
.74
15
17
17
530-XX-430(N)
530
6000 180
60
29
8.1
1.7
12.6
.0046
.7 20
Cont. Torque
with
BOSS08
Drive (in-lb)*
28.4
43.2 (37.2)
37.2
46.1
*Additional Speed Torque Curves are on page 80-82.
530-XX-412 with BOSS08 @ 115VAC
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
H
BRUSHLESS SERVO MOTORS