Specifications
FEATURES & BENEFITS
92 mm and Nema 34
Brushless Servo Motors
7
7
n Compatible with BOSS08 brushless drives.
n Samarium Cobalt permanent magnets.
n Insulation Class F.
n IP65, TENV enclosure.
n IP64, shaft rating.
n Keyed shaft.
n 92mm frame sizes.
n Nema 34 mounting with “N” suffix.
n Flying leads.
n Thermal sensors.
The BOSS brushless motor series is a comprehensive motor line
designed for use in a variety of demanding applications.
Brushless motors have no brushes to wear out or maintain. High
quality ball bearings are the only mechanical linkage between the
stator and rotor. Commutation is achieved through a feedback
device such as Hall Effect sensors or an encoder.
These high-energy servomotors provide premium performance by
combining Samarium Cobalt magnets with low inertia rotors giv-
ing excellent acceleration and deceleration characteristics. In
addition, Samarium Cobalt magnets have a high resistance to
demagnetization allowing for operation in high peak torque appli-
cations.
Although the BOSS motors on this page can be used with other
trapezoidal brushless DC drives we recommend they be matched
with our BOSS08 brushless DC drives.
If your application requires additional torque, Gator gear heads
mount directly to the BOSS Nema (N) versions.
BOSS Motor Series
*Additional specifications are on page 73, including ratings when matched to Minarik brushless drives.
Note:1) Tolerance on resistance and inductance is ±10%. Tolerance on Ke and Kt values are ±15%/-5%
º
Boss Motor Specifications
Model No.
Max
Terminal
Voltage
(VDC)
Peak
(in-lb)
Therm.
(ºC/W)
Weight
(lb)
530-08-354(N)
530-08-374(N)
Max
Mechanical
Speed
(RPM)
Torque
Cont.
(in-lb)
Peak
(A)
Current
Res.
(ohms)
Ind.
(mH)
Inertia
(in-lb-s²)
Cont.
(A)
260
260
6000
6000
26
104
19
27
25
35
5.2
7.1
2.8
1.5
14
8.9
.00015
.00018
1.09
.99
11.5
12.8
Continuous TQ
Peak TQ
Cont. Torque
with
BOSS08
Drive (in-lb)*
17.7
21.3
Feedback Devices (XX). Standard is 08
- 08 = Hall Effect sensor feedback
- 10 = 1000 ppr encoder with U,V,W, commutation tracks,
line driver output, +5VDC, 20mA.
- 20 = 2000 ppr encoder ith U,V,W, commutation tracks,
line driver output, +5VDC, 20mA.
530-XX-354 with BOSS08 @ 115VAC
*Additional Speed Torque Curves are on page 80-82.
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
H
BRUSHLESS SERVO MOTORS