Specifications
FEATURES & BENEFITS
6
7
n Compatible with BOSS04 brushless drives.
n Samarium Cobalt permanent magnets.
n Insulation Class F.
n IP65, TENV enclosure.
n IP64, shaft rating.
n Keyed shaft.
n 92mm frame sizes.
n Nema 34 mountings with “N” suffix.
n Flying leads.
n Thermal sensors.
The BOSS brushless motor series is a comprehensive motor
line designed for use in a variety of demanding applications.
Brushless motors have no brushes to wear out or maintain.
High quality ball bearings are the only mechanical linkage
between the stator and rotor. Commutation is achieved
through a feedback device such as Hall Effect sensors or an
encoder.
These high-energy servomotors provide premium perfor-
mance by combining Samarium Cobalt magnets with low
inertia rotors giving excellent acceleration and deceleration
characteristics. In addition, Samarium Cobalt magnets have
a high resistance to demagnetization allowing for operation
in high peak torque applications.
Although the BOSS motors on this page can be used with
other trapezoidal brushless DC drives we recommend they be
matched with our BOSS04 brushless DC drives.
If your application requires additional torque, Gator gear
heads mount directly to the BOSS Nema (N) versions.
92 mm and Nema 34
Brushless Servo Motors
BOSS Motor Series
*Additional specifications are on page 73, including ratings when matched to Minarik brushless drives. Note:1) Tolerance on resistance and inductance is ±10%.
Tolerance on Ke and Kt values are ±15%/-5%
Feedback Devices (XX). Standard is 08
- 08 = Hall Effect sensor feedback
- 10 = 1000 ppr encoder with U,V,W, commutation tracks,
line driver output, +5VDC, 20mA.
- 20 = 2000 ppr encoder with U,V,W, commutation tracks,
line driver output, +5VDC, 20mA.
º
BOSS Motor Specifications*
Model No.
Max
Terminal
Voltage
(VDC)
Peak
(in-lb)
Therm.
(ºC/W)
Weight
(lb)
530-XX-332(N)
530-XX-334(N)
530-XX-352(N)
Max
No Load
Speed
(RPM)
Torque
Cont.
(in-lb)
Peak
(A)
Current
Res.
(ohms)
Ind.
(mH)
Inertia
(in-lbs²)
Cont.
(A)
380
260
380
6000
6000
6000
53
53
76
13.3
13.3
19
12.2
18
18
2.4
4.8
3.6
10.4
4.6
5.4
43
20
30
.00113
.00113
.0015
1.35
1.35
1.09
9.5
9.5
11.5
530-XX-372(N)
380
6000 104
27
24
4.9
3.4
19
.0018
.99 12.8
Cont. Torque
with
BOSS04
Drive (in-lb)*
13.3 (11.1)
11.1 (11.1)
19.0 (17.7)
21.6 (21.3)
Continuous TQ
Peak TQ
530-XX-332 with BOSS04 @ 115VAC
*Additional Speed Torque Curves are on page 80-82.
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
H
BRUSHLESS SERVO MOTORS