Specifications
FEATURES & BENEFITS
4
7
BOSS Motor Series
n Compatible with Minarik LVBL and MMBOSS drives.
n Samarium Cobalt permanent magnets.
n Insulation Class F.
n IP65, TENV enclosure.
n IP64, shaft rating.
n Keyed shaft.
n 55mm frame size.
n Nema 23 mounting with “N” suffix.
n Flying leads.
Feedback Devices (XX). Standard is 04
- 04 = Hall Effect sensor feedback
- 10 = 1000 ppr encoder with U,V,W, commutation
tracks, line driver output, +5VDC, 20mA.
- 20 = 2000 ppr encoder with U,V,W, commutation
tracks, line driver output, +5VDC, 20mA.
*Additional specifications are on page 73, including ratings when matched to Minarik brushless drives.
Note:1) Tolerance on resistance and inductance is ±10%. Tolerance on Ke and Kt values are ±15%/-5%
º
BOSS Motor Specifications*
Model No.
Max
Terminal
Voltage
(VDC)
Peak
(in-lb)
Therm.
(ºC/W)
Weight
(lb)
530-XX-210(N)
530-XX-230(N)
530-XX-212
Max
Speed
No Load
(RPM)
Torque
Cont.
(in-lb)
Peak
(A)
Current
Res.
(ohms)
Ind.
(mH)
Inertia
(in-lb-s²)
Cont.
(A)
64
88
66
8000
8000
8000
6.3
12.7
22
1.6
3.1
4.9
10.4
15.0
35
2.4
3.3
7.2
3.9
2.5
.57
3.2
2.5
.96
.00017
.00021
.00038
3.6
2.6
2.6
2.9
3.3
4.9
The BOSS brushless motor series is a comprehensive motor
line designed for use in a variety of demanding applications.
Brushless motors have no brushes to wear out or maintain.
High quality ball bearings are the only mechanical linkage
between the stator and rotor. Commutation is achieved
through a feedback device such as Hall Effect sensors or an
encoder. These high-energy servomotors provide premium
performance by combining Samarium Cobalt magnets with
low inertia rotors giving excellent acceleration and decelera-
tion characteristics. In addition, Samarium Cobalt magnets
have a high resistance to demagnetization allowing for oper-
ation in high peak torque applications.
The BOSS motors specifically listed on this page are for use
with low voltage, trapezoidal DC drives. They are the perfect
match for Minarik's LVBL and MMBOSS low voltage DC brush-
less drives.
If your application requires additional torque, Gator gear
heads mount directly to the BOSS Nema (N) versions.
Continuous TQ
Peak TQ
3.5
2.7
1.4
Cont.
Torque with
Minarik
Drive (in-lb)*
*Additional Speed Torque Curves are on page 80-82.
530-XX-210 with LVBL02 @ 24VDC
55mm and Nema 23
Low Voltage Brushless Servo Motors
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
H
BRUSHLESS SERVO MOTORS