Specifications

1
7
1/2 to 2 Hp
Isolated PWM Brushless DC 4-Quadrant
FEATURES & BENEFITS
Typical Applications
n Material Handling
n Office Machinery
n Film Processing
n Packaging Machinery
n Elevated Conveying
n Wrapping
n Sealing
All BOSS drives incorporate the desirable attributes of AC and DC
systems; low maintenance due to no brushes, compact, cool running
quiet motor; good speed regulation, quick response, high speeds,
superb low-end torque, all with no audible switching noise! With
Minarik’s BOSS-4Q and CM Series of brushless drives you also get
the added benefit of regenerative operation and braking from 1/2 to
2 Hp.
The CM personality card plugged into the BOSS power board turns
the BOSS into a high-bandwidth (up to 3kHz) servo amplifier. When
combined with a front-end servo controller, the BOSS-CM makes a
very robust and responsive servo system. The BOSS-CM needs no
calibration other than a current limit setting, and can accept either a
0- ±10VDC or PWM (22-25kHz) reference signal.
The BOSS-CM has the same mounting footprint and terminal block
layout as the BOSS-4Q. Making it easy to upgrade from the BOSS-
4Q (operating in current mode) to the BOSS-CM and get even bet-
ter performance.
BOSS CM Dimensions
BOSS CM Series Specifications
15
4
2
1/2 - 1
3.87 (98)
3.87 (98)
2.62 (67)
130
130 - 240
100-360
100-360
90 - 120
90 - 240
BOSS15-115AC-CM
BOSS04-D240AC-CM
8
1 - 2
130 - 240
100-360
90 - 240
BOSS08-D240AC-CM
Models
Input Voltage
(VAC)
Input Voltage
(VDC)
Output
Current
Max Output
Voltage
30
8
16
Peak Current
(Amps)
Hp Rating
Height
(A)
4.44
[113]
3.00
[76]
0.70 [18]
2.20 [56]
6.30 [160]
6.90 [175]
0.97 [25]
A
All dimensions in inches [millimeters]
BOSS15-115AC-CM
BOSS CM Series
n Current mode operation only: Designed for use with front-end servo controllers only.
n 4Q reversing: Regenerative or 4 quadrant drives have the ability to perform quick, contactorless reversing on-the-fly!
n Isolated inputs: Accepts floating or grounded signals either 0- ± 10VDC or a 22-25kHz PWM signal.
n User adjustable calibration pot: Current limit.
n Diagnostic LEDs: LEDs for Power and fault.
n Stopping modes: Regenerative braking (N.O.) with an external dumping circuit available for handling the most demanding
of regen braking applications and coast to a stop (N.C.).
n Quick connect terminal block: Quick and easy wire termination.
n High bandwidth: Up to 3kHz bandwidth for high performance.
n Modular designs: Same power board as BOSS-1Q and BOSS-4Q.
n Accepts AC or DC voltage: Accepts an AC input or DC input voltage of 100-360VDC.
n Options & Accessories: BOSSDB-115 or BOSSDB-230 regen dump circuits.
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
G
BRUSHLESS DC DRIVES