Specifications

Delta-Wave Series
1/15th Hp 115VAC or 230VAC TENV
VAC AC 3-phase Motors
3
6
n 3-phase Induction Motor
n 1/15th Hp
n Compatible with Minarik’s VFD, VFD-PCM,MAC & AC Series drives
n Totally enclosed non-ventilated (TENV)
n Hardened spur gearhead models
n Non-Geared versions come with footmount
Finally, there is a convenient and simple AC 3-phase
motor that can be controlled with a variable frequency
drive. Minarik’s VFD, VFD-PCM, MAC & AC Series drives
take a single phase 115 VAC or 230 VAC input, and out-
puts 115 VAC or 230 VAC respectively, in three phases
to power these motors. Earlier technology and costs pre-
vented 115 VAC, 3-phase motor growth, but now
Minarik offers either the 115 or the 230 VAC system
packaged as a powerful, efficient, cost effective solution
to your motion control needs.
The 38 frame motor features class F2 insulation and is
rated for continuous duty. It is available with a gearhead
to achieve the proper torque and speed you desire.
These gearmotors provide ratios of 11.5, 23 and 52 to
1. They feature precision machined gearing which is
hardened for maximum load capabilities. Geared mod-
els have oversized output bearings for greater overhung
load capacity and longer life. High carbon output shafts
provide maximum strength and rigidity. All needle bear-
ing journals are precision ground after heat treating to
provide maximum finish and fit. The gearmotors are
designed for mounting at any angle, but shaft up with
motor below is not recommended. Conduit box available
upon request.
See compatibility chart on page 66 for recommended AC
drives.
Optional conduit box and mounting bracket on page 95.
Dimensions
FEATURES & BENEFITS
D SERIES
506-21-004 115 11.5 1/15 150 25 0.78 208 3.86 3.50 9.96 8.46
506-21-005 115 23 1/15 75 52 0.78 256 3.86 3.50 9.96 8.46
506-21-006 115 52 1/15 33 110 0.78 330 3.86 3.50 9.96 8.46
506-23-004 230 11.5 1/15 150 25 0.39 208 3.86 3.50 9.96 8.46
506-23-005 230 23 1/15 75 52 0.39 256 3.86 3.50 9.96 8.46
506-23-006 230 52 1/15 33 110 0.39 330 3.86 3.50 9.96 8.46
Specifications
TENV • 115 or 230v • Three Phase • 1.0 Service Factor
Over-
DIMENSIONS
Input F.L. F.L. hung
Model Voltage Ratio Input Output Torque Amps Load P X XL XH
Number (VAC) to 1 HP RPM (In.-Lb.) VAC (Lb.) Inches
X
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
F
AC DRIVES & MOTORS