Specifications

2
6
1/15th Hp 115VAC or 230VAC TENV
AC 3-phase Motors
Delta-Wave Series
FEATURES & BENEFITS
n 3-phase Induction Motor
n 1/15th Hp
n Compatible with Minarik’s VFD, VFD-PCM,
MAC & AC Series drives
n Totally enclosed non-ventilated (TENV)
n Geared and non-geared versions
n Non-geared versions come with foot mount
See compatibility chart on page 66 for recommended AC
drives.
Optional conduit box and mounting bracket on page 95.
506-21-001 115 12 1/15 140 28 1.10 180 3.07 2.14 9.16 7.96
506-21-002 115 30 1/15 57 67 1.10 171 3.07 2.43 9.16 7.96
506-21-003 115 60 1/15 28 100 1.10 155 3.07 2.43 9.16 7.96
506-23-001 230 12 1/15 140 28 0.54 180 3.07 2.14 8.87 7.67
506-23-002 230 30 1/15 57 67 0.54 171 3.07 2.43 9.16 7.96
506-23-003 230 60 1/15 28 100 0.54 155 3.07 2.43 9.16 7.96
Specifications
TENV • 115 or 230v • Three Phase • 1.0 Service Factor
Over-
DIMENSIONS
Input F.L. F.L. hung
Model Voltage Ratio Input Output Torque Amps Load P X XL XH
Number (VAC) to 1 HP RPM (In.-Lb.) VAC (Lb.) Inches
Dimensions
P
Z SERIES
Finally, there is a convenient and simple AC 3-phase motor
that can be controlled with a variable frequency drive.
Minarik’s VFD, VFD-PCM, MAC & AC Series drives take a
single phase 115 VAC or 230 VAC input, and outputs 115
VAC or 230 VAC respectively in three phases to power these
motors. Earlier technology and costs prevented 115 VAC 3-
phase motor growth, but now Minarik offers either the 115
or the 230 VAC system packages as a powerful, efficient,
cost-effective solution to your motion control needs.
The compact 31 frame motor features class F2 insulation
and is rated for continuous duty. It is available with or with-
out a gearhead to achieve the proper torque and speed you
desire. Gearhead versions are available in 12, 30, and 60
to 1 ratios. They feature precision machined gearing which
is hardened for maximum load capabilities. Geared models
have oversized output bearings for greater overhung load
capacity and longer life. High carbon output shafts provide
maximum strength and rigidity. All needle bearing journals
are precision ground after heat treating, to provide maxi-
mum finish and fit. The gearmotors are designed for mount-
ing at any angle, however, vertical mounting with the shaft
up with motor below is not recommended.
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
F
AC DRIVES & MOTORS