Specifications

1/4 to 25 Hp

Isolated PWM AC IP20

The AC200 Series of sub-micro drives are a compact, low-cost solution for AC motor control. The AC200 contains exten-

sive I/O and full programming menu typically found in more expensive drives. This series has a 3-digit seven segment dis-

play for programming, drive status, and diagnostics. The AC200 has eighteen isolated inputs and outputs including start,

stop, 0-10VDC input, 4-20 mA input, 10VDC supply for external potentiometer, 12 VDC supply for an external relay, two

open collector outputs, two analog outputs, three programmable inputs, and RS485 (RXA, RXB).

In addition, the AC200 Series has several options that include: din rail mount capability, a 1000 Hz output frequency option

for very high speed applications, through-hole mounting capability that puts the heat sink outside the drive enclosure for

better thermal management, and dynamic braking resistor modules for applications that require quick stops. The AC200

Series is a great choice when drive control is done from remote locations by process control (analog references of 0-10

VDC or 4-20mA) or serial communications.

Part number and specifications on page 57.

n Isolation: Inputs and outputs are isolated and allow any speed reference signal to be accepted.

n Programmable: Programmed using the front keypad, remote keypad, hand-held EPM programmer, Modbus, or

through your PC using the Techlink software available on our website ww.minarikcorp.com

n Reversing: Solid-state devices make reversing as simple as closing a contact.

n Display: 3-digit seven segment display for programming, status and diagnostics.

n Braking: DC injection braking is standard with a dynamic braking option available when faster repetitive stops are

needed.

n Din rail mounting: An optional din rail mount is available.

n Carrier frequency: Adjustable from 4 to 10kHz to help reduce the audible noise from the motor.

n Automatic restart: Can be programmed to automatically restart upon application of power.

n Skip frequencies: Two skip frequencies are available to lock out critical frequencies that cause mechanical

resonance in the system.

n 48 programmable parameters that include:

• Four or more ways to start and stop the motor • Two adjustable acceleration & deceleration times (.1 to 3600 seconds)

• DC injection braking time and voltage • Maximum (999Hz) and minimum (0Hz) frequency

• Current limit and motor overload • Fixed and adjustable acceleration boost

• Slip compensation • Seven pre-set speeds

• and many more!

FEATURES & BENEFITS

Typical Applications

n Machine Tools

n Conveyors

n Pumps

n Packaging Machinery

n Industrial Washing

Machines

n EPM programmer: Optional hand-held programmer allows you to save 30 programs and download within seconds to

the EPM module which plugs into the drive.

n For use with 3-phase motors

AC200 Series

Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com

AC DRIVES & MOTORS