Specifications

1/4 to 3 Hp

PWM AC IP20

n Isolation: Inputs and outputs are isolated and allow any speed reference signal to be accepted.

n Programmable: Programmed via the front keypad, hand-held EPM programmer, or PC using the Techlink software available

on our website www.minarikdrives.com

n Reversing: Solid-state devices make reversing as simple as closing a contact.

n Display: 3-digit seven segment display for programming, status, and diagnostics.

n Braking: DC injection braking is standard with a dynamic braking option available when faster, repetitive stops are

needed.

n Din rail mounting: An optional din rail mount is available.

n Carrier frequency: Adjustable from 4 to 10 kHz to help reduce the audible noise from the motor.

n Automatic restart: Can be programmed to automatically restart upon application of power.

n Skip frequencies: Two skip frequencies are available to lock out critical frequencies that cause mechanical resonance in

the system.

n 48 programmable parameters that include:

• Four or more ways to start and stop the motor • Two adjustable acceleration & deceleration times (.1 to 3,600 seconds)

• DC injection braking time and voltage • Maximum (240Hz) and minimum (0Hz) frequency

• Current limit and motor overload • Fixed and adjustable acceleration boost

• Slip compensation • Seven pre-set speeds

• and many more!

FEATURES & BENEFITS

Typical Applications

n Machine Tools

n Conveyors

n Pumps

n Packaging Machinery

n Industrial Washing

Machines

ACM100 Series

The ACM100 Series variable frequency, sub-micro, V/Hz drive is a programmable easy to use drive in an IP20 enclosure. It

has a 3-digit seven segment display for programming, drive status, and diagnostics. The ACM100 Series has nine isolated

inputs and outputs including stop/run, 0-10 VDC input, 4-20mA input, 10 VDC supply for speed pot, DC supply for digital

inputs, speed pot common, open collector output, and three programmable inputs.

In addition, the ACM100 Series has several options that include: din rail mount capability, a 1000 Hz output frequency option

for very high speed applications, through-hole mounting capability that puts the heat sink outside the drive enclosure for bet-

ter thermal management, and dynamic braking resistor modules for applications that require quick stops. The ACM100 Series

is your best choice when drive control is done from remote locations by process control ( analog references or 0-10 or 4-20mA

or simple start/stop.

Part numbers and specifications on page 57.

n EPM programmer: Optional hand-held programmer allows you to save thirty (30) programs and download within seconds

to the EPM module which plugs into the drive.

n Default settings: Drives ship with default settings requiring only a few inputs to be off and running.

n For use with 3-phase motors

ACM100 Series

Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com

AC DRIVES & MOTORS