Specifications

n Conveyors
n Pumps
n Hoists & Cranes
n Packaging Machinery
n Industrial and
Commercial Machinery
4
5
1/15 to 1 Hp
PWM AC
n AC motors: Use with
3Ø induction motors as well as 1Ø AC motors such as a permanent split capacitor, shaded pole, AC
synchronous and AC stepping.
n Reversing: Accomplished via solid-state devices and is as simple as closing a contact.
n Speed range and regulation: 2% regulation of base speed. 100:1 speed range.
n User adjustable calibration pots: Minimum speed, maximum speed, current limit, acceleration/deceleration, slip
compensation and torque boost.
n Diagnostic LEDs: Forward, reverse, fault, over current limit trip, current limit, and power.
n Stopping modes: Use DC injection braking (N.O.), or coast the motor to a stop (N.C.).
n Quick connect terminal block: Quick and easy wire terminations.
n Carrier frequency: 11 or 16.5kHz selectable carrier frequency for silent motor operation.
n Optional isolation: The HCPL isolation (-PCM option) isolates all inputs and outputs.
The MAC Series controls most 1Hp or smaller, 115 or 230 VAC three
phase AC induction motors, as well as some types of single phase AC
motors. The MAC drive is capable of a 100:1 speed range, which
means the system speed range will be motor dependent. It will operate
with constant torque from 0 to 60 Hz and constant Hp 60-400 Hz. The
MAC Series also features solid-state reversing, adjustable acceleration
and deceleration, slip compensation, adjustable current limit, and I
2
T
class 10 current trip to protect the motor, control, and machine. The
enable circuit can also be used to interface with the motor’s thermal
overload for further protection.
Minarik has included even more features to help improve the perfor-
mance of the AC motor including torque boost during acceleration,
adjustable slip compensation, and adjustable minimum and maximum
speeds. Up to 8 motors can be controlled by a single MAC drive. All of
this is accomplished in a compact 4.98” x 5.38” footprint. For AC
induction motors and many single phase motor applications, consider
the MAC Series as the first solution.
FEATURES & BENEFITS
Typical Applications
MAC Series
MAC05-D240AC
MAC Series Specifications
MAC05-D240AC (-PCM)
MAC08-D240AC (-PCM)
1/15-1/4* @ 115VAC or
1/6-1/2 @ 230VAC
1/4-1/2* @ 115VAC or
1/2-1 @ 230VAC
115
230
115/230
230
115/230
230
2.5 cont.
5 peak
4 cont.
8 peak
115
230
HP Rating
Output Voltage
(VAC)
Input Voltage
(VAC)
Models
Output Current (A)
* Horsepower is doubled when voltage doubler terminals are
jumpered and using 115 VAC input.
For matching AC motors, see pages 61 to 66.
MAC Dimensions
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
F
AC DRIVES & MOTORS