Specifications

2
5
n NEMA 4X enclosure: Compact, easy to mount, black plastic enclosure.
n Isolated inputs: Accepts floating or grounded signals 0-10VDC, 0-5VDC or 4-20mA.
n Control a variety of motors: 3-phase induction motors, single-phase permanent split capacitor (PSC), shaded pole and
synchronous motors.
n User adjustable calibration pots: Minimum speed, maximum speed, current limit, acceleration, deceleration, slip
compensation, boost, zero set, brake current, and brake time.
n Diagnostic LED's: Power, Fault, and Torque limit.
n Stopping modes: DC injection braking or coast (jumper selectable).
n Adjustable 4 to 16kHz switching frequency: Quiet motor operation or reduced electrical noise.
n Quick disconnect terminal block: Allows for quick and easy terminations and changes.
n Torque "foldback": Allows up to 200% torque to overcome intermittent peak loads.
n Additional features: Auto or manual restart after low input voltage fault (jumper selectable), line fusing, enable and
direction inputs.
The Volts/Hertz, PWM, VFDP4X04-D230AC-PCM has all the features of the original
VFD series with several additional enhancements. They include a lightweight, plastic
NEMA 4X enclosure, an isolated front end, minimum speed adjustment potentiome-
ter (pot), output voltage doubling, DC injection braking, and automatic or manual
restart when power is restored.
The VFDP4X04-D230AC-PCM accepts reference signals that are 0-5V, 0-10V or 4-
20mA without an additional isolation card. The DC injection braking feature comes
with two additional calibration potentiometers (Braking Current and Braking Time) for
easy set up.
The dual voltage VFDP4X04-D230AC-PCM has a "doubling" jumper that can be set
to output 230VAC to the motor when only 115VAC is available. Another jumper
selectable option is for choosing automatic or manual restarting.
Many applications require an inverter to be able to automatically re-start itself in the
event of a power loss. If automatic restart is selected, then after a low voltage fault,
the inverter will restart itself when the input voltage is restored to a minimum level.
The features, flexibility and compact size of the VFDP4X04-D230AC-PCM make it the
ideal choice for AC motor applications under 1 horsepower where the drive will be
mounted in adverse surroundings.
FEATURES & BENEFITS
VFDP4X04-D230AC-PCM
115 or 230VAC
0-230VAC
4
0-120 Hz
1/6-1
NEMA 4X
(black plastic)
Input Voltage
±10%, 1 phase
50/60 Hz
Output Voltage
Output
Current (A)
Max Output
Frequency
Hp Rating
Enclosure Type
Model Number
VFDP4X04-D230AC-PCM
VFDP4X04-PCM Series
Typical Applications
n Conveyors
n Material Handling
n Packaging Machinery
n Sorting Machinery
n Door and Gate Openers
n Food Packaging Machinery
For matching AC motors, see pages 61 to 66.
VFDP4X-PCM Dimensions
1/6 to 1 HP
Isolated PWM AC NEMA 4X
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
F
AC DRIVES & MOTORS
NEW