Specifications

5
n Compact size : Chassis unit is small and easy to mount.
n Isolated inputs: Accepts floating or grounded signals 0-10VDC, 0-5VDC or 4-20mA.
n Control a variety of motors: 3-phase induction motors, single-phase permanent split capacitor (PSC), shaded pole and
synchronous motors.
n User adjustable calibration pots: Minimum speed, maximum speed, current limit, acceleration, deceleration, slip compensation,
boost, zero set, brake current, and brake time.
n Diagnostic LED's: Power, Fault, and Torque limit.
n Stopping modes: DC injection braking or coast (jumper selectable).
n Adjustable 4 to 16kHz switching frequency: Quiet motor operation or reduced electrical noise.
n Quick disconnect terminal block: Allows for quick and easy terminations and changes.
n Torque "foldback": Allows up to 200% torque to overcome intermittent peak loads.
n Additional features: Auto or manual restart after low input voltage fault (jumper selectable), line fusing, enable and direction
inputs.
The Volts/Hertz, PWM, VFD05-D230AC-PCM has all the features of the original
VFD series with several additional enhancements. They include an isolated front
end, minimum speed adjustment potentiometer (pot), output voltage doubling,
DC injection braking, and automatic or manual restart when power is restored.
The VFD-PCM series accepts reference signals that are 0-5V, 0-10V or 4-20mA
without an additional isolation card. The DC injection braking feature comes with
two additional calibration potentiometers (Braking Current and Braking Time) for
easy set up.
The dual voltage VFD-PCM inverters have a “doubling” jumper that can be set
to output 230VAC to the motor when only 115VAC is available. Another jumper
selectable option is for automatic or manual restarting.
Many applications require an inverter to be able to automatically re-start itself in
the event of a power loss. If automatic restart is selected, then after a low voltage
fault, the inverter will restart itself when the input voltage is restored to a mini-
mum level.
The features, flexibility and compact size of the VFD05-D230AC-PCM series
makes it an ideal choice for most AC motor applications under 1.5 horsepower
FEATURES & BENEFITS
VFD05-D230AC-PCM
115 or 230VAC
0-230VAC
5
0-120Hz
1/2-1.5
Chassis
Input Voltage
±10%, 1 phase
50/60 Hz
Output
Voltage
Output Current (A)
Max Output
Frequency
Hp
Rating
Enclosure Type
Model Number
VFD05-D230AC-PCM
VFD05-PCM Series
Typical Applications
n Conveyors
n Material Handling
n Packaging Machinery
n Sorting Machinery
n Door and Gate Openers
n Food Packaging Machinery
For matching AC motors, see pages 61 to 66.
VFD05-D230AC-PCM Dimensions
0
1/2 to 1.5HP
Isolated PWM AC Chassis
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
F
AC DRIVES & MOTORS
NEW