Specifications

Non-Geared DC Motors

FEATURES & BENEFITS

n Low profile space-saving design.

n Large oversized brushes assure longer life.

n Heavy-duty, stamped steel, bolt-on base (removable).

n Permanently lubricated double shielded ball bearings.

n Capable of dynamic braking for faster stops.

n Permanent magnet brush DC motors.

n Framed motors designed to operate with

SCR or PWM drives powered by 115 VAC or 230 VAC input.

Select the motor which best matches your performance needs. Then check

the compatibility of that motor with your Minarik drive on page 41.

Motor Performance Data

*Motor windings rated for 130 VDC

**Motor windings rated for 240 VDC

Motor Motor Shaft Continuous Speed Terminal Rated Current

Part Power Speed Torque Reduction Voltage (cont.) NEMA

Number [Hp] [RPM] [in-lbs] [ratio:1] [VDC] [Amps]

506-07-027 1/4 1750 9 NA 90* 2.50 LSS56C

506-07-028 1/3 1750 12 NA 90* 3.50 MSS56C

506-07-029 1/2 1750 18 NA 90* 5.00 NSS56C

506-07-038 1/2 2500 12 NA 90* 5.00 LSS56C

506-37-029 1/2 1750 18 NA 180** 2.5 NSS56C

506-36-038 1/2 2500 12 NA 180** 2.50 56C

506-07-030 3/4 1800 27 NA 90 7.6 VS556C

506-37-035 3/4 1750 27 NA 180** 3.80 56C

506-36-039 3/4 2500 17 NA 180** 3.80 56C

506-06-131 1 1750 36 NA 90* 10.0 WLS56C

506-07-040 1 2500 25 NA 90* 10 56C

506-36-131 1 1750 36 NA 180** 5.00 ZS56C

506-36-140 1 2500 25 NA 180** 5.00 XS56C

504-36-041B 1.5 1750 52 NA 180** 7.20 56C

504-36-042B 2 1750 72 NA 180** 10.00 56C

504-36-043B 3 1750 108 NA 180** 14.70 56C

Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com

DC MOTORS