Specifications

2
0
n MM footprint: An extremely compact size in an industry standard mounting footprint.
n Speed range and regulation: 1% regulation over 60:1 speed range.
n User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration.
n Diagnostic LED: LED for current limit status.
n Stopping Modes: Coast to minimum speed with inhibit terminals (N.O.), decelerate to min speed through pot circuit
External dynamic braking can be added.
n Spade terminals: Easy to use, lower cost, and able to fit in a smaller package.
n Additional features: Dual voltage AC input and field voltage for shunt wound motors.
n Options and accessories: “-Q” option includes quick disconnect terminal, power LED and a current limit header that out
puts 5VDC when the drive is in current limit. DLC600 digital controller. PCM4 isolator card. 201-0024 inhibit plug with
18” leads.
The MM23000C Series of drives are a reliable and cost-effective solution for
controlling your permanent magnet or shunt-wound DC motors in variable-
speed applications. Both the MM23001C and the MM23011C use SCRs to
provide full-wave rectification of the AC line input. These dual voltage dri-
ves operate using 115 VAC or 230 VAC, 50/60 Hz, to operate 90 or 180
VDC SCR brush-type motors. These MM drives control motors from 1/20 to
2 Hp.
Packaged in a compact footprint, these user-friendly drives possess diag-
nostics and options to accommodate user needs. A current limit header,
allows the drive to send a signal indicating current limit to an external con-
trol. Also, users can minimize wiring problems by specifying the “- Q” option
to make all wire connections to the screw terminals of a quick-connect
removable terminal block.
Typical Applications
MM23001C
MM23000C Series
FEATURES & BENEFITS
*The 223-0159 heatsink must be used when the MM23001C outputs above 5 amps. Drives operate from 50 - 60 Hz.
MM23000C Series Specifications
MM23011C
MM23001C*
115/230
115/230
0-90 or
0-180
0-90 or
0-180
50/100/200
(1 Amp)
50/100/200
(1 Amp)
1/20-1/8 @ 90 VDC or
1/10-1/4 @ 180 VDC
1/8-1 @ 90 VDC or
1/4-2 @180 VDC
1/20-1/8 @ 90 VDC or
1/10-1/4 @180 VDC
1.5
1.37
10.0*
Max Output
Current (ADC)
Field Supply
(VDC)
Output Voltage
(VDC)
Input Voltage
(VAC)
Models
Form
Factor
Hp Rating
1.37
n Conveyors
n Pumps
n Packaging Equipment
n Printers
n Industrial and
Commercial Machinery
MM23000C Dimensions
3.58 [91]
1.75
[44]
0.19 [5]
3.80 [97]
4.30 [109]
0.19 [5]
0.64 [16]
3.80 [97]
4.05 [103]
3.58
[91]
0.19 [5]
0.64 [16]
0.19 [5]
4.30 [109]
MM23011C-Q
3.80 [97]
4.30 [109]
0.74 [19]
1.60 [41]
All dimensions in inches [millimeters]
1.28
[33]
0.93 [24]
1.75 [44]
0.74 [19]
0.96 [24]
3.80 [97]
4.30 [109]
1.28 [33]
1.60 [41]
1.80 [46]
For matching DC motors, see pages 37 to 43.
All other models
1/20 to 2 Hp
SCR DC
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
A
SCR DRIVES